Industrial single-shaft shredders
The KWM-SS series reduces plastic lumps, wood waste and other suitable recyclables before downstream processing. Choose the chamber, motor and screen around your feed material and required output.
- Hydraulic pusher feeds material into a single cutting rotor
- Replaceable screen helps control discharge size
- Reversible rotor knives offer multiple cutting edges

KWM-SS model comparison
Reference rotor speed: 73 rpm. Screen openings: 40–100 mm.
Scroll sideways to see all columns.
| Model | Main motor (kW) | Hydraulics (kW) | Cutting chamber (mm) | Rotor Ø (mm) | Rotor / fixed knives | Pusher stroke (mm) | Discharge height (mm) | Machine L × W × H (mm) | Approx. weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| KWM-SS600 | 18.5 | 1.5 | 540×600 | 220 | 23 / 4 | 500 | 500 | 1800×1350×1700 | 1600 |
| KWM-SS750 | 37 | 2.2 | 830×708 | 400 | 44 / 6 | 820 | 610 | 2810×2000×2115 | 4460 |
| KWM-SS1100 | 55–75 | 5.5 | 830×1071 | 400 | 66 / 8 | 820 | 610 | 2810×2650×2115 | 5464 |
| KWM-SS1400 | 75–90 | 5.5 | 830×1302 | 400 | 80 / 10 | 820 | 610 | 2810×2890×2115 | 6200 |
| KWM-SS1600 | 2 × (55–75) | 7.5 | 1000×1533 | 480 | 94 / 12 | 1000 | 950 | 3475×4100×2700 | 10800 |
| KWM-SS2100 | 2 × (75–90) | 7.5 | 1000×1995 | 480 | 122 / 16 | 1000 | 950 | 3475×4900×2700 | 13000 |
Screen opening is a configuration parameter. Actual particle size and throughput depend on material properties, feeding conditions and the selected screen.
Equipment configurations
Illustrations show two sizes in the KWM-SS series.


Materials and applications
Typical feeds include plastic lumps, selected rigid plastics, wood waste and suitable paper or film. Confirm material compatibility and downstream requirements before choosing a model.
What to send for selection
Include photos of the incoming material, maximum piece dimensions, required throughput, target output size and the equipment that comes next. Cutter configuration, drive power and achievable output are confirmed for each project.